LK-T80 Aluminum Foil Container Machine with 80ton Press Capacity, Connectable to Scrap Baler for 24/7 Operation

Every aluminum foil container production produces scrap. The punched-out web, the trimmed edges—it adds up quickly. For a production line running at 50 strokes per minute with 4 cavities, that scrap accumulates faster than you might think. Managing this scrap is not just about keeping the workshop clean; it's about recovering value from material you've already paid for.

The LK-T80 Aluminum foil container making machine is designed with this reality in mind.

Scrap That Doesn't Pile Up
The LK-T80 connects directly to a scrap baler. As the machine stamps containers, the remaining material web travels to the baler, where it is compressed into dense blocks. One baler can handle output from 2-3 production lines simultaneously. This means:

• Less floor space wasted on loose scrap piles
• Easier handling and transport—stackable blocks vs. messy rolls
• Better recycling value—compressed scrap is cleaner and more efficient to transport

Built for Continuous Operation
The LK-T80 runs 24 hours a day if needed. One operator manages the line. The enclosed lubrication system keeps the workshop clean—no oil mist contaminating your work environment or your scrap. Safety doors protect your team. Automatic fault display on the touchscreen means problems are identified immediately, minimizing downtime.

The machine itself is built to last. The "H" frame and solid worktable provide the stability needed for consistent production at high speeds. Core components from Mitsubishi, Siemens, ABB, and Schneider Electric ensure reliability. Clients in over 30 countries use this equipment daily.

A Complete System Approach
When you order the LK-T80, you're not just buying a press. You're getting a production system:

• The main press with 80-ton capacity, 4-6 cavities
• Mold lifter arm for quick changes (15 minutes, one person)
• 60-set mold parameter storage
• Compatibility with scrap baler (5.5KW, intermittent operation)
• Optional stacker (Independent Operation, plug and play)
• Optional lid making equipment

The math is straightforward: more efficient scrap management means better material yield. Better yield means lower cost per container. The LK-T80, connected to a scrap baler, delivers that efficiency shift after shift.

• Integrated Scrap Management: Connect directly to a scrap baler (2-3 lines per baler). Transform messy aluminum waste into dense, stackable blocks that save floor space and transport costs.
• Better Material Yield: Recover value from trim waste (typically 14.5% of raw material). Example: for 450 containers, 1 ton of raw material yields ~244,499 finished pieces plus recoverable scrap.
• Clean Production Environment: Fully enclosed lubrication system means no oil mist contaminating your workshop or your scrap material—cleaner scrap commands better recycling prices.
• Continuous Operation Capability: Runs 24/7 if needed. One operator manages the entire line including scrap handling. Automatic fault display on touchscreen minimizes downtime.
• Fast Product Changes: Change molds in 15 minutes with one operator using hydraulic pump and mold lifter arm. Store 60 mold parameters for instant recall when switching products.
• Built for Stability: "H" frame and solid worktable (not hollow like many competitors) ensure consistent production at high speeds—protecting both product quality and mold life.
• Global Component Quality: Mitsubishi PLC and touchscreen, Siemens/ABB main motor, Schneider Electric low-voltage components, SMC/Airtac pneumatics ensure reliability.
• Complete System Compatibility: Works with stacker (Independent Operation), lid making equipment, and scrap baler. Order one line with 4 molds and it fills a 40ft HC container.

Applications:

It accepts orders of 1 unit minimum, priced $45,000-$75,000. Packed in strong wooden crates and iron casings, it’s shipped safely worldwide without damage.

Off-the-shelf models arrive in 30 days, customized ones as agreed. Flexible payment (T/T, L/C) and 50 units/year production capacity for quick order handling enhance its dependability.

FAQ:

Q: How many LK-T80 lines can one baler handle?
A: One scrap baler can handle the output from 2-3 production lines simultaneously. The baler runs intermittently (5.5KW power), so it doesn't add significant electrical load to your operation.

Q: Does the baler affect production speed?
A: No. The baler works independently. Your LK-T80 runs at full speed (35-68 strokes/min) regardless of what the baler is doing. The scrap feeds continuously, and the baler compresses when enough material accumulates.

Q: Can I use the same baler for multiple machine types?
A: Yes. The baler connection is standard and can accept scrap from different machines. It's designed to handle output from 2-3 lines regardless of whether they're T63, T80, or other compatible models.

Q: Can I emboss my logo on coated containers without damaging the coating?
A: Absolutely. The detachable logo block is designed for clean embossing on smooth coated surfaces. Since the machine applies even, stable pressure, the logo comes out crisp without cracking or damaging the coating layer.

Q: What coated material grades and thicknesses work with this machine?
A: The LK-T80 handles 3003H24, 8011 H22, and 3004 H24 grades. Thickness range is 0.025-0.2mm. Note: for material under 50 micron, we do not recommend using 3004.

Q: I'm worried about coating scratching during feeding. How does the machine prevent this?
A: The feeder is designed for smooth material transition into the stamping area. Combined with the machine's rigid frame and controlled speed (35-68 strokes/min), the material moves consistently without jerking or scraping that could damage coatings.

Q: What about workshop space—how much room does the baler need?
A: The baler footprint is modest compared to the space saved by eliminating loose scrap piles. Exact dimensions depend on the baler model, but the space saved typically exceeds the space used within weeks of operation.

Q: Do you provide the baler, or do I source it separately?
A: We can supply the complete system including the baler, or you can source locally. Either way, we ensure compatibility. Many clients prefer to buy everything from one source for simpler support.

Q: How does scrap baling improve my bottom line?
A: Three ways: (1) Higher recycling revenue—clean, compressed scrap gets better prices than loose, contaminated scrap. (2) Lower labor costs—less time spent handling messy waste. (3) More production space—no sprawling scrap piles limiting your layout.